Maintenance 1: Check the oil, keep good oil to meet the requirements. 2: Clear the spindle taper glitches. 3: Cleaning the hydraulic transmission system, oil network, adjusting the oil pressure. 4: Clear the spindle above impurities, oiling the spindle to ensure the spindle lubrication. Institutions Examination 1: Check the adjustment of the lifting mechanism and the clamping mechanism to achieve sensitive and reliable. Lubrication System Check one: clean linoleum, require full cup of oil, oil flow, oil window bright radial drilling must stop drilling and maintenance procedures when loading and unloading of the workpiece when the workpiece loading and unloading heavy lifting to be a reasonable choice spreader and methods, and. The rocker turned away from the top of the table. Prevent a collision with the workpiece when the drill arm drop. Work bench prohibit stacking tools, materials, debris Tanggu drilling direct, non-bent on the bench, straightening the workpiece. When drilling operation is prohibited gear, pull the lever when shifting allowed strong wholesale Tengzhou Z3132 drilling ban overload. During drilling operation, the non-operator wearing gloves drilling work. When drilling operation, the operator will be allowed to leave. To leave or blackouts when drilling wholesale Cangzhou, should rise drill, the drill bit away from the workpiece, and cut off the power switch. . Maneuver close to drilling through feeding, use manual feed, drill out of the workpiece is not allowed to stop. Automatic feeding, such as the automatic stop feed, you must find out the reason immediately behind the failure to exclude prospective continue working. Drill large diameter holes and the work finished, the headstock should be as close to the post. Drilling | Drilling Tanggu Direct | Deutsche Bank Deutsche Bank is provided by mechanical machinery. Welcome to consult Dezhou Bank Machinery Manufacturing Co., Ltd. (www.deyinjixiezhizao.com), be sure to specify when the contact is through the "Business Alliance members" see, thank you! Contact: Mr. Sun